ProScan PS35652 Owner's Manual page 9

Basic Operation Theory
Step 2
Then press OFF/ON button to turn on that
component.
Note: The TV and some od/er components will
automatically turn on when you press the button in
step I.
Door Closed
1
ComponentButtons
First press one of these seven component
buttons to tell remote which component
you want to control. You can program
each of these buttons to control your
brand of equipment.*
Step 3
FunctionButtons
These function buttons can now be used
to control the basic functions of the
component you selected in step 1. To
control a different component, first press
its component button (vcm, VCR2/LD,
CABLE, AM/FM, CD TAPE, or TV),
and then
press the desired function button.
Note: Not all components have functions that can
l_z controlled by these buttons, but you can
experiment with your particular models to discover
exactly which buttons wilt control iL
DoorOpen
* The TV button automatically controls your TV - no
additional programming is required. Details for
programming d'le vcm and VCR2/LO b uttons to control other
brands of VCR's are on page 3 I. Details tbr programming
the AM/FM, CO,and TAPE buttons to control audio equipment
are on pages 32-33. Details for programming the CABLE
button to control cable boxes are on page 44.
Note: The rcmote's door must be completely closed beIk)re the bunons on
the dr×)r wilt operate_ Both the hop and bottom door latches must be
securely °°snapped" in place.
Pressing the buttons on the door when the door is open or only partially
closed will not operate the TV.