ProScan PS35652 Owner's Manual page 12

Anytime you are watching a TV program (or a VCR tape
through your TV), you'll be able to use the special features
described below.
FREEZE
Freeze
li) freeze the picture, press FREEZE. T he sound of the
picture will not be affected. To stop, press FREEZE a gain.
.... ZOOM
Zoom
Press and hold ZOOM iN until the desired zoom amount is
reached.
To reduce the zoom amount and return to normal size,
press and hold zoom OUT.
After you have zoomed in, press the arrow buttons to move
around the screen (pan). Sometimes you may want to
fleeze the picture first and then zoom in or you can zoom
in and then freeze the picture.
Starting Channel Guide(with remote only)
To start channel guide, press the CHAN GUIDE button.
• The screen will display all the channels that are
programmed into Channel Memory, 12 at a time.
• Each little screen will display a stop-action picture that
will be continuously updated.
• To stop the screens from updating, press FREEZE.
• While the 12 channels are on the screen, you can use the
ZOOM INbutton to enlarge the picture and then use the
arrow buttons to move around the screen. To return to
normal size, press ZOOMOUT.
Note: When using the ZOOM
_N fealure,
yon will see a mosaic pattern
as the picture is made larger.
iiii
i_i _I!7
ii i_ii
Z IZ_
• To select one of the channels being displayed in the
channel guide, press the two corresponding number
buttons for that channel.
Note: Channels 2-13 and 9l were programmed into the Channel Scan
Memory at the factory. These are the channels thai will appear during
channel guide unless yon auioprogram the channel memory or add and
erase channels as described on pages 24-25.
StoppingChannel Guide
• To select one of the channels being displayed in the
channel guide, press the two corresponding number
buttons for that channel. That will stop channel guide and
take you directly to the channel you selected.
• Another way to stop channel guide is to press CHAN GUIDE
again.