ProScan PS35652 Owner's Manual page 37

After the AM/FM,CD, or TAPE button is programmed, the
buttons described _!ow will operate the basic functions of
most audio equipment. Depending on the age, brand, model,
and type of audio equipment, some models may not be able to
respond to all the function buttons listed, You will want to
experiment with each button to determine the exact function
for your component.
G
®
®
®
@
Door Closed
AM!FM, CD,TAPE: Press one of these buttons to turn on
the audio component and put remote in "Audio M(_Je"
so other buttons will control the audio component. Press
the rv button to put remote back into "TV mode".
VOLUME: Press to change volume
level.
PLAY: Press to start component
playing.
REWIND: Press while component is stopped to rewind
tape.
FF(Fast Forward): Press while component is stopped to
fast forward tape.
RECORD:Press to start recording.
STOP: Press to stop whatever the component is doing:
playing, recording, rewinding, etc.
®
®
®
®
q>
Door Open
PAUSE: Press to pause play or record. To release pause,
press again.
NumberButtons: Press two numbers to directly select a
channel.
CHANNEL: Press to select the next higher or lower
channel in the cornponent's channel memory.
OFF/ON: Press to turn on component.
Press again to turn
off. Some components will turn on automatically when
you press the AM_:M, CO, or TAPE button.
ANTENNA: Performs various functions depending on the
type of equipment. Experiment with this button.