ProScan PS35652 Owner's Manual page 14

1. Repeatedly
press MENU to
select VIDEO
MENU,
& Repeatedly press
MENU to select a
function, then press +
or - to adjust it.
Pressing MENUmoves down the screen (one item per press).
Pressing MEMORY moves up the screen (one item per press).
'File video menu will automatically disappear t¥om the
screen if you do not press + or - within a few seconds.
Via remote control, your TV will "remember" which
flmction you displayed last, even after the menu has
disappeared t¥om the screen. St), if you want to adjust the
same function again, simply press the + or - button on the
remote control The last function you adjusted will
reappear on the TV screen.
CustomPicture Memory for Input Channels
The channel numbers you select to see signals from
components (like a VCR) that are connected to the _NPUT
jacks on the back of the TV are called input channels.
Selecting channel 90 lets you see the signal coming from
whatever componenl
is attached to the s VIDEO connector,
channel 91 lets you see the signal from the INPUT t jacks,
and channel 92 lets you see the signal from the INPUT2
jacks. Your TV is equipped with a custom picture memory
li)r these input channels. When the TV is tuned to one of
these channels (90, 91 ,92), you can change the picture
settings fl)r that component's signal as desired without
changing the settings of any other channel. This is very
useful because you will be able to adjust for the best
picture fmnl each of your components and the TV will
remember those settings automatically the next time you
tune that input channel.
COLOR a djusts the amount of color in the picture. Press + to
increase color or press - to decrease color.
TINTadjusts the color of flesh tones. Press + to add more red tint
or press - to add more green tint.
CONTRAST
adjusts the overall brightness and contrast of the picture.
Press + to increase contrast or press - to decrease contrast.
BRIGHTNESS adjusts the brightness of the dark portions of the
picture. Press + to increase brightness or press to decrease
brightness.
SHARPNESS
adjusts picture sharpness. Press + to increase sharpness
or press - to deere&'¢2 sharpness.
PICTURE RESET l ets you quickly change all the video functions
shown above back to the factory settings. Press either + or - to
reset the video functions.
Adjusting for a Color Picture that Pleases You
l Decrease coh)r to minimum, This will leave a black-and-white
image on the screen.
2 Adjust contrast until the picture pleases you.
3 Adjust brightness until the black parts of the picture appear
black. You may need to wait until the picture shows
something you're sure is black. Be careful not to lose the
details in darkly shaded areas.
4 Increase color until you reach a pleasing level of intensity.
5 At[just tint until flesh tones or other color objects appear
natura!.
6 Adjust sharpness for a pleasing level of picture sharpness.
(For weak signals, the picture may be more pleasing with
sharpness decreased.)
Caution: When using TV games, computers_ and similar products with
your TV. keep the brightness and contrast functions at low settings. If a
fixed (nommoving) pattern is left on the screen (or long periods of time
at a high brightness or contrast setting, the image can be permanently
imprinted onto the screen. These types of imprints are not covered by
your warranty because they are the result of misuse.
10