ProScan PS35652 Owner's Manual page 23

Setting the Sleep Timer
With tile Sleep Timer, you can program your TV to turn
itself off after a period of up to four hours. This is useful
when you want to watch TV for an hour or so before going
to sleep.
The Sleep Timer will begin to count down to zero. The word
SLEEPwill apwar on the screen whenever you change
channels or press the rv button to let you know the Sleep
Timer is activated.
Setting Sleep Timer
with or without remote
1 Repeatedly press the MENUbutton to select SETUP MENUand
then press + to display the setup functions,
{
{ }
2 The SLEEPTIMERshould be selected. If' not, repeatedly press
the MENUbutton to select it.
The amount of lime remaining before the TV shuts itself off
will appear in the SLEEPTIMERmenu whenever you press the
MENUbutton to select the SETUPMENUand then press +.
¸5¸¸i i ! /(/ ii //;7
)
1 hour and
_ET _LkR_ 28minutes
remaining
Press the + or- button to select the length of time (up to four
hours) you want the TV to stay on. Each press of the button
increases the time 30 minutes (up to l'bur hours). Then the
time display will start over with 0:00.
: --_ ..................... I hourand
30 minutes
6 When
the Sleep Timer counts down to 0:00,
the SLEEPTIMER
display will appear on the screen for a few seconds, Then the
TV will turn itself off. If you want the TV to stay on when
this display appears, press the TV button on the universal
remote. The Sleep Timer will be cancelled, To add more
time to the Sleep Timer when this display appears, press the +
button on either remote.
Clearing Sleep Timer
To cancel the sleep timer, enter the Sleep Timer function and
then press the + or - button until the screen shows 0:00.
4 The display will automatically
disappear from the screen in a
few seconds. It will disappear more quickly if the STATUSor
CLEAR button is pressed.
19