ProScan PS35652 Owner's Manual page 18

Receiving Stereo Broadcasts
Your TV is fully capable of reproducing stere() sound from
TV stations
mmsmitting
stereo sound in your area. All you
have to do to
enjoy
stereo sound is to make sure the TV's
STEREO/SAP function is set to STEREO so the TV can receive
stereo broadcasts.
Normally this function can be left in the STEREO m ode.
Your TV will then automatically reproduce either stereo or
monaural sound, whichever is broadcast.
In some fringe viewing areas, however, the stereo signal
may not be strong enough for quality reception. The signal
may drift, or the reproduction may become noisy. Should
-that occur, change the STEREO/SAP function to the MONO
mode to receive clearer, cleaner sound.
Helpful tlint: Some television stations transmit a "pilot" signal that
makes your TV think it's receiving stereo, even though the broadcast
signal is monaural The "pilot" signal will nmke the stereo indicator
apF_ear on the screen next to the channel number, however, you will not
be able to hear stereo sound. If the stereo indicator appears but you can
not hear stereo sound, check with the television station to inquire
whether the program being broadcast is in true stereo or monaural audio,
Resetting the Audio Function to Receive Stereo
with or without remote
1 Press tile MENUbutton repeatedl_
to select the AUDIOMENU
and then press + to display the audio menu.
2 Press Ihe MENU button
repeatedly
to select the STEREO/SAP
function.
12 STEREO 12
EQUALIZER EQUALIZER
REAR VOL-. ........ I......... +
14
Press either + or repeatedly until the word STEREO appears al
the right,
Note: Each time you press the + or- button, the on-screen display
will change from STEREOto MONO, (The word SAt' may also appear if
SAP audio is present). SAP i,_ explained at the right.
STEREO _Z
i
Note: When the STEREO!SAP function is set to the STEREO
mode.
your
FV will let you know when a channel is being broadcast and received
in stereo by displaying the word STEREOnext to the channel number
on the screen, (Press the TVor STATUSbutton to see the channel
numbcl).
Receiving SAP Broadcasts
Some TV stations that broadcast stereo also broadcast
another audio program called SAR SAP stands tor Second
Audio
Program
and is sometimes used
to
broadcast a
second audio track lbr a
bilingual
movie.
Because SAP is
only
available with stereo
broadcasts,
the
TV's STEREO/SAP function must be in the STEREO mode to see
if SAP audio is available. Alter you have set the
STEREO/SAP function to the STEREO
mode,
your TV will
display
the word STEREO next to the channel number when
stereo audio is
being
received. If SAP audio is also
available,
your TV will
display
an asterisk
(*)
alter the
word STEREO (STEREO*).
You can then listen to the SAP audio by changing the
STEREO/SAP function to its SAPsetting as explained below.
Although SAP audio is transmitted with the stereo signal,
it is not broadcast in stereo. That means the SAP audio
will be monaural sound.
Your TV will reproduce SAP audio until you change
channels.
Turningon SAP Channel
with or without remote control
1 Press the MENU button repeatedly to select the AUDIOMENU
and theu press + to display the audio menu.
_ i ii _ i_ i _i_ii _i_
i _iiii(!iiii i !i!iiii
!_UTE
Repeatedly press the MENUbutton until STEREO/SAP i s
selected.
REAR VOW-L; ; :;1 L :_.,÷
Repeatedly
press either + or - until the word SAPappears at
the right.
Notes: Each time you press the + or - buttom the tunction will
change from STEREOto SAP to MONO (it" SAP is available). If SAP is
not available, the function will change fi'om STEREOto MONO.
The word SAP will apDear next to the channel number when you are
listening to SAP audio. (Press the TVor STATUSbutton to see this
display).
4 To turn off SAP, change the channel,