Table of Contents
Advertisement
Changing Antenna Input
Your TV has two separate antenna inputs on the back
(labeled ANTAand ANT8) that allow you to connect two
difl)zrent signal sources if desired.
For example, you can
connect a cable-TV system to one input and a home
antenna to the other input.
By pressing the ANTENNA button on the remote control, you
can switch back and forth between the two signal sources.
Listed below are some other common uses of the two
antenna inputs:
1 Connecting
a cable-TV
system (or antenna) to one input and a
VCR to the other.
2 Connecting
a cable-TV
system (or antenna) to one input and a
video game to the other.
3 Connecting
a double-trunk
cable system to both inputs.
4 Connecting
a cable-TV convener/decoder
box that scrambles
only premium channels and cannot be controlled
by remote
control.
Connection
details are on pages 42-43,
The Channel
Memory
is the list of channel
numbers
your
TV will stop on when you press the CHANNELup or down
buttons.
Your TV provides
two separate
channel
memories
(one for ANTA input and one for ANT8 input).
This allows
you to add or delete
channels
into each channel
memory
as
desired.
I_111:1_1.- --
-
When you use the AUTOPROGRAM
function, the TV
automatically
checks both inputs and sets up a separate
channel memory fk)r each.
Changing Antenna Input
with remote
1 Press the ANTENNAbutton on the remote control to switch
from ANTA input to ANTB input.
The color of the channel
numbers will change fi'om blue to yellow to let you know you
are now watching whatever signal is connected
to the ANTg
connector on the back of the TV.
)
))
yellow
for ANT B
i_i_
_
_
ii _' _i/
i_
Press the ANTENNA button
again
to switch
back to ANT A, The
color of the channel
numbers
will change
back to blue to let
you know
you are now watching
whatever
signal
source
is
connected
to tile ANT A connector.
ChangingAntenna Input
without remote
1 Repeatedly
press the MENUbutton to select SETUP MENUand
then press + to display the setup functions.
i !
i i
i
i
!
)
2i;
;)));
z
2
?
_!i ! 12 ¸! !! =i !
i/
2 Repeatedly press the MENU button to select ANTENNA: A /B,
" blue for ANT A
3 Press the + or - button to change the setting. The screen
display will change from A to 8 to let you know you are now
winching whatever signal is connected
to the ANT Bconnector
on the back of the TV.
\
yellow fi)r ANTB
OFF
4 Press the + or - button again to switch back to ANTA. The
screen display will change to ANTENNA: A to let yon know you
are now watching whatever
signal source is connected
to the
ANTA connector
on the back of the TV.
12
\,
' blue for ANTA
_2J
Advertisement
Table of Contents
Need help?
Do you have a question about the PS35652 and is the answer not in the manual?
Questions and answers