ProScan PS35652 Owner's Manual page 31

Cable Box Channel Setup
The CABLE C HAN function lets you program to which cham_el
the TV will automatically tune when you press the CABLE
button on the remote. This is handy if you have to connect
a cable box to your TV. You will no longer have to
remember the output channel of the cable box because the
TV will remember for you.
For example, if you connect a cable box to the TV's
CABLE/ANTENNA connector (as shown on page 42), you will
no longer have to remember to select channel 2, 3, or 4 on
the TV to see what's coming from the cable box. By
entering the cable box's output channel (usually 02, 03, or
04) next to the CABLE C HAN function, the TV will
automatically tune to that channel each time you press the
CABLE button on the remote.
This tunction is especially convenient if you have a
remote-control lane cable box that can be operated by the
CABLE button on the remote as described on lmge 44.
Pressing the CABLE button will then not only switch the
remote to cable mode but will also automatically tune the
TV to the proper channel tk)r viewing the picture from the
cable box.
Setting Up Cable Box Channel
with or without remote
1 Repeatedly press the MENU button to select SETUP MENU and
then press + to display the setup functions.
2 Repeatedly press MENU to select the CABLE C HAN function.
8, 7P, 13
tHAN MEM: sTORED
CABLEIAIR: CABLE
VCR I CBAN: 91
VCR
2 CHAN: 92
IW_ZZ _
_2-*_,,zr,i_.
i I
Enter the channel number you want toprogram by pressing
two digit buttons on the remote control. (The channel
number you enter is the channel to which the TV will tune
automatically when you later press the CABLEbutton on the
remote). The TV will change to the channel you select, This
will help you to confirm that it is indeed the channel you
want the TV to automatically tune. Most cable boxes output
their signals on either channel 02, 03, or 04.
8 : 27PH 03
CBAN HEM: i
CABLEIAIR: _ABLE
VCR I CHAN: 91
VCR 2 CHAN; 92
I,Im I.'AI_E I.
4 Press the + button to program the channel number you
selected into the CABLECHANfunction memory.
B:ZZ_a
m_ ;
Note: Pressing the - button here will turn off this feature and
display CABLECHAN: OFF again.
_5R