ProScan PS35652 Owner's Manual page 7

2 Move the STRENGTH s witch to the LOW position. If this
improves the tilt but it is still not satisfactory, move the
STRENGTH s witch to the HIGH position. This should
correct the situation, If moving the STRENGTH s witch
makes the tilt worse, go to the next step.
3 Change the position of the POLARITY switch, If this
improves the tilt but it is still not satisfactory, move the
STRENGTH s witch to the HtGH position. This should
correct the situation.
You may need to reset the POLARITY and STRENGTH s wilches
if the TV is moved or reposinoned in the room_ especially
if the TV will be facing a differenl direclion,
8 AutoProgramthe TV'schannel memory.
'- 1 To start the TV autoprogranmfing itself, press the MENU
button repeatedly to select the SETUP MENU and thmq
press the + button Todisplay the setup functions, Press
MENU again to select the AUTOPROGBAM function, then
press +. Details are on page 24.
MUTE
VIDEO MENU
AUDIO MENU
ANTENNA: A
CHAN LABEL
PARENTAL CTRL: OFF
_HAN _TRL_ NORMAL
You can also add and delete channels fi'om memory as
desired. Press MENU repeatedly _o select the SETUP
MENU. t hen press + to display the setup functions. Press
MENU repeatedly to select 1he CHAN MEMfunction, then
select the desired channel number and press + m add or
to erase the channel. Details are on ;m_e 25.
MUTE
VIDEO MENU
CHAN LABEL
PARENTAL CTRL: OFF
CHAN CTRL: NORMAL
Set the clock.
1 Repeatedly press the MENU bulion IO select the SETUP
MENU and then press +. Press MENUrepeatedly again to
select the CLOCK SETdisplay.
MUTE CABLE/AIR: CABLE
VIDEO MENU VCR I CHAN: OFF
AUDIO MENU V£R 2 CHAN: OFF
___ : :-, -
2 Press and hold the - button to select the correct hour.
Then press and hold the + button to select the correct
minute.
3 The correct time will now appear on the screen
whenever you change channels or press the STATUS
button.
Note: If power is interrupted R_ran extended time, you will need
to reset the c|_'k.
10 Review menus.
1 To see the xideo menu,
repeatedly press
MENU
button to select VIDEO MENU
and then press +.
Repeatedly press MENU to select
desired function and then press +
or- to adjust it. Details are on
page 10.
i i! ii!ii !
(
CBNTR _ +
BRIGHT-/
...... L ,i- -+
SHARP ". .................
PICTURE RESET
To see the audit) menu repeatedly press MENU to select :
the AUDIO MENU and then press +. Repeatedly press
MENU to select desired function and then press + or - to
adjust it. Details begin on page 1 l,
ii I _ i
CuTe
V 0 e_NU
=_':-z--',==. • ....
SETUP MENU
_' !ii i i_
STEREO/SAP: STEREO
SURROUND: OFF
REAR
VOL-. ...... I......... +
SURR BAL-, ....... I......... +
EXPAND STEREO: OFF
SPEAKERS: ON
To see the setup menu,
repeatedly press MENU to
select SETUP MENU and
then press +. Repeatedly
press MENU to select
desired function and then
press + or -- to adjust it.
Details begin on page 18.
MUTE
VIDEO MENU
SET ALARM
ANTENNA: A
CHAN LABEL
PARENTAL CTRL: OFF
CHAN CTRL: NORMAL
AUTOPROGRAM
CHAN MEN; STORED
CABLE/AIR: CABLE
VCR I CHAN: OFF
VCR 2 CHAN: OFF
CABLE CHAN: OFF
CLOCK SET -BR_MIN
DENO:PRESS
+
ON TV
11 Review other features.
Later, after you feel comfortable with your TV and remote
control, you can review the detailed control descriptions
and special features covered in this manual.
You can also use the rest ot this manual as a reference
guide to review detailed information about each operating
control and function. The alphabetical index in the back
will help you quickly locate desired infl)rmation. A quick-
leference operating guide is also printed inside the back
cover for your convenience.
3