ProScan PSVR64 Owner's Manual page 44

Recording a Program
Check, Edit, or Clear a VCR Plus+ or _mer Recording
1. Press MENU,PROG on remote to display VCR MAIN MENU on TV screen.
2. Press 2 to display the TIMER RECORDINGS menu.
3. Press 2 for Review Existing Progs. feature.
The first program in the timer is displayed.
• Check the Programs: Press MENUoPROG to display information for the next
program.
• Edit the Program: Press DISPLAY to edit the program. The frequency menu
appears first so you can change how often you want to record the program.
How often should this
program record?
! One Time
Daily (every day)
Weekdays (Mort -Frt)
4 Weekly (Once per week)
VCR
MAIN MENU
VCR
Plus+
TIMER RECORDINGS
1
Create e
New
Program
/
Prognam 1 (One Time) t
J
Channel 08
Start Time 02:10 PM
End Time 03:35 PM
Start Date 11/18/95 Sat
Press a number button to select the type of program you want to record.
Program 1 (One
Time)
Channel 08
Start Time 02:10 PM
End Time 03:35 PM
Start Date 11/18/95 Sat
Tape Speed SLP
Press CLEAR to correct
Press MENU to save
Edit the rest of the program using the CLEAR and number buttons,
• Clear the Program: Press CLEAR when the program you want to remove
appears on the TV screen.
13mer Recording From the VCR's Line Input
The line input refers to the signal coming from the AUDIO and VIDEO IN jacks of the
VCR. Recording from the line input is convenient if you have a satellite receiver or
similar component attached to these jacks. To timer record from the component
connected to the VCR's line input:
Press INPUT to enter the channel number when you program the timer. Enter VIDEO1
to record from the jacks on the back of the VCR or VIDEO2 to record from the jacks on
the front of the VCR.
Program I (One Time)
Channel \yIDE01
Start Time_T_:--
End Time -::--
Start Date --J--/--
Tape Speed $LP
Press CLEAR to correct
Press MENU to save
Stopping a Recording in Progress
With the VCR: Press POWER and then STOP within a few seconds.
With the Remote: Press VCR1 (VCR2,LD) and then STOP within a few seconds.
4O