ProScan PSVR64 Owner's Manual page 41

Recording While You're Away
VCR Plus+ Recording
(continued)
The VCR Plus+ and timer program features let you program the VCR to record up to eight different programs within a
one year period. Before using VCR Plus+ to record a program, make sure that:
• The clock is set correctly.
• A tape with safety tab has been inserted with enough tape to record the programs.
• The remote is set to control the VCR m using VCR1 (VCR2.LD).
• The VCR is setup for VCR Plus+ programming.
• If you receive all channels through a cable box, setup the cable box as shown on pages 1!-12.
• If you do not use a cable box or RCA DSS® satellite receiver for all channels, complete VCR Plus+ setup on page 36.
Setting a VCR Plus+ Recording
1. Press MENU. PROG on the remote to display the VCR MAIN MENU on the
TV screen.
2. Press I to display the VCR Plus+ menu.
3. Press numbers on the remote to enter the PlusCode number fro' the program
you want to record. PlusCode numbers are found in most local TV listings.
Press CLEAR on the remote to correct an entry.
4. Press MENU" PROG to enter the program.
If the VCR does not recognize the PlusCode number, Unrecognized number...
Please re-enter appears on the TV screen. Check the number and enter it again.
5. Press 1, 2, 3, or 4 to select type of program.
1 One Time - single program recorded once.
2 Daily - program recorded at same time every day.
3 Weekdays - program recorded at same time Monday through Friday.
4 Weekly - program recorded at same time once a week.
6. Select recording speed using SPEED on the remote. •
7. Press CLEAR if you want to change the program end time.
This feature allows you to extend the recording time on VCR Plus+ programs.
This option may be useful when recording programs such as sporting events
that could go past scheduled broadcast times.
8. Press MENU°PROG to enter your program. A reminder appears which will
time out.
.
10.
11.
PROGRAMS OVERLAP may appear on the screen if you entered two
programs where the times overlap.
The.TIMER RECORDINGS menu appears. Press 3 to enter an additional
VCR Plus+ program, or press 0 to exit.
Turn off the VCR before recording time.
T I RE R appears in the VCR's display panel when the timer has been
programmed.
If using a cable box, leave it turned on. If the VCR cannot control the cable
box, tune it to the channel you want to record.
VCR MAIN MENU
VCR PLUS+
Enter PLusCode number
(from TV Listing)
/l\
Press MENU to exit
How often shouLd this ]
program record? 1
(
2 DaiLy (every day) /
3 Ueekdeys (Mort - Frt) |
6 Weekty (Once per ueek) /
Program 1 (One Time)
Channel 08
Start Time 02:10 PR
End T4me 03:35 PM
Start _.te 3_18195 Sat
Tape Speed SLP/i\
Press CLEAR to correct
Press MENU to save
Program 1
has been saved.
37