ProScan PSVR64 Owner's Manual page 42

Recording a Program
Recording While You're Away (]imer Recording)
The VCR Plus+ and timer program features let you program the VCR to record up to eight
different programs within a one year period. Before setting the timer, make sure that:
• The clock is set correctly.
• A tape with safety tab has been inserted with enough tape to record the programs.
• The remote is set to control the VCR --using VCR1 (VCR2*LD).
• If you receive all channels through a cable box or RCA DSS ® satellite receiver, setup the
cable box or RCA DSS ® satellite receiver on pages 11-12.
Setting a Timer Recording (Using On-Screen+ Menus)
1. Press MENU opROG on remote to display VCR MAIN MENU.
2. Press 2 to display TIMER RECORDINGS menu.
3. Press I to display Create a New Program menu.
4. Press 1, 2, 3, or 4 to select type of program.
1 One Time -- single program recorded once.
2 Daily -- program recorded at same time every day.
3 Weekdays -- program recorded at same time Monday through Friday.
4 Weekly -- program recorded at same time once a week. •
5. Press number buttons on the remote to enter the channel number (or INPUT
to select line input), start time including AM or PM, end time, and start date
of the recording. Just follow the on-screen prompts.
Press CLEAR to correct an entry.
If you receive all channels from a cable box or satellite receiver and have
completed Cable/DSS Box Setup, the output channel of your cable box or
satellite receiver will automatically appear on the menu.
Channels with numbers less than 100 will record from the DSS antenna
connection. Channels with numbers 100 and over will record from the
corresponding DSS channel.
6. Select recording speed using SPEED on the remote.
7. Press MENUapROG to enter your program. A reminder appears which will
time out.
PROGRAMS OVERLAP may appear on the screen if you have entered two
•programs where the times overlap.
8. The TIMER RECORDINGS menu appears. Press I to enter an additional
timer program, or press 0 to exit.
9. Turn off the VCR before recording begins.
T I RE R appears in the VCR's display panel when the timer has been
programmed.
10. If using a cable box, leave it turned on.
'if you'rca_le b0X_(S _ not
i _¢hannel you want to record before the recording
VCR HAZN RENU ° (]
! VCR PLus÷
TIKER RECORDINGS
How often should th(s
program record?
Z De4Ly (every day)
3 Weekdays (Man - Frt)
4 _eekLy (Once per week)
Program 1 (One Ttme)
ChanneL _
. Progrem 1 (One T_me)
than;eL _q8
Start ?1me _:-- j
Program 1 (One Time)
End Tfme --:--/(_ 2-PH
I I Program 1 COne T_me)
I:,o P.
L::::=++=+,,:o,=
Program 1
has been saved,
38