ProScan PSVR64 Owner's Manual page 28

Playing a Tape
Using the Playback Features
Pause for Stop Action
This feature stops the tape in action and enables you to examine the
details of the scene. Stop action works best with tapes recorded in the
SP and SLP speeds.
1. Press PAUSE during playback to stop the action.
8 T I L L appears in the VCR's display panel.
2. Press TRACKING up or down to reduce any jittering of the
picture.
3. Press PAUSE or PLAY to return to playback.
The VCR will automatically switch from stop-action playback to
stop after a few minutes.
Slow Motion
You can view the picture in slow motion during play or play pause.
SLOW - and + allow you to change the speed. Sound is turned off
during slow-motion playback. Slow motion works best in the SP
or SLP speed.
1. During playback, Press SLOW + or- to start slow-motion
playback.
S L 0 W+ appears in the VCR's display panel.
2. Press SLOW + to increase the speed or - to decrease the speed.
3. Use TRACKING up or down to remove any streaks from the
picture.
4. Press PLAY to return to playback.
The VCR will automatically switch from slow-motion playback to
stop after a few minutes.
Automatic Tracking
The VCR has automatic tracking which adjusts the picture when
playing back a tape recorded on another VCR. Automatic tracking is
turned on whenever a tape is inserted or the VCR's power is turned on.
Manual Tracking
Occasionally, you may need to manually adjust tracking on a tape
recorded on a different VCR or camcorder, The TRACKING buttons on
the remote or VCR are used when playing a tape. They have no effect
during recording.
• When streaks or snow appear, press TRACKING up or down for
the best possible picture.
• Press TRACKING up or down during stop-action pause to reduce
picture "jitter".
• Press both TRACKING buttons at the same time to turn automatic
tracking back on.
24