ProScan PSVR64 Owner's Manual page 27

Playing a Tape
Playing a Tape
This section introduces you to the basic operation of your VCR and discusses the following playback features:
• Pause for Stop Action
• Slow Motion
• Automatic
Tracking
• Manual Tracking
• Picture Search and
Frame Advance
• Auto Play
• Auto Repeat
• DISPLAY Button
• Time Counter
• Tape Playback:
HI-H/LINEAR/MIX
• Pro-Tect Plus" Locking
• Index Search
• Time Search
• Blank Search
• Zero Search
Operating Instructions
To Play a Tape
1. Turn on the TV and tune it to channel
3, 4, or TV's video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The
cassette-in I_ indicator lights, and the
V C R indicator lights if the Auto
TV/VCR feature is set to ON. The tape
automatically begins playback if the
safety tab on the cassette has been
removed and the auto play feature is
turned on.
3. Press PLAY, if necessary. P L AY
appears in the VCR's display panel.
4. Press TRACKING up or down to
remove any streaks from the picture,
if necessary. (Details are on page 24.)
5. Press STOP.
6. Press REW on the remote or turn the
shuttle ring toward REW on the VCR.
The VCR will automatically rewind the
tape if it reaches the end of the tape
during playback. While rewinding,
you can press POWER and the VCR
will turn off after rewinding.
7. Press EJECT.on the VCR to eject the
tape once it is completely rewound.
Safety
23