ProScan PSVR64 Owner's Manual page 14

Setting Up the VCR
Use the On-Screen Menu System
Point and Select is the method you use to move through the menu system. There are two ways to select (or change) a
menu or feature. Although there are two ways to access the menu system, only the number buttons are referenced
throughout this manual to explain the VCR features and operations.
Using.the Number Buttons
Press MENU.PROG to display the VCR MAIN MENU. Then use the number
button on the remote that corresponds to the number on the menu to select (or
change) an item. Using the number button allows you to point and select a menu
item at the same time.
Using the Arrow Buttons
Press MENU-PROG on the remote or MENU on the VCR to display the VCR MAIN
MENU. Then use the/x or _ arrow button to point to a menu or item. Press
MENUePROG on the remote or MENU on the VCR to select (or change) the item.
The left and right arrow buttons move from one location to another. Use these
buttons to select a function such as minutes or hours during clock set. Then use the
up and down arrows to change.
,0.0
oO
/N
q
Remote
O®®
MENU ¢LEA_ CHANNEL
DISPLAY T_C_I.¢
®®
Turn On the TV
ButtonsLocatedBehind
LeftControlDoorof VCR
1. Turn on the TV.
2. If you use one of the basic hookups, tune the TV to the channel selected
with the CH3 CH4 switch on back of VCR.
If you used one of the advanced hookups, tune the TV to the TV's video input.
(See TV owner's manual for details.)
Turn On the VCR
1. PressVCR1 on the remote.
The first time you turn on the VCR, the SETUP menu will appear. Follow the
steps on the screen to automatically set-up the cable box or RCA DSS ® satellite
receiver, auto channel search, automatically set the time, and select some
feature options.
! Press number button I on the remote to Begin setup. Proceed to Auto
Cable/DSS Box Setup.
• Press number button 2 on the remote to Cancel the setup.
If you choose not to use the SETUP menu, follow the steps in this section to
manually set up the VCR so it will operate properly.
If you skip auto channel search during setup the auto clock set feature will not
be performed.
If the SETUP menu does not appear or you prefer, you can manually select the
SETUP menu. Each of these features (except the automatic clock set) may also
be performed individually.
To manually select the SETUP menu.
• Press MENU.PROG to display the VCR MAIN MENU.
• Press 5 to display the SETUP menu.
SETUP
The setup procedure
uitl heLp you configure
your VCR. UouLd you
Like to begin the
setup procedure nov?
2 Cancel
10