ProScan PSVR64 Owner's Manual page 35

Using Playback Features
Zero Search
The zero search feature allows you to quickly return to a counter reading of 0:00:00 at any spot on the tape. This
is convenient when you want to watch a segment of the tape several times.
1. Insert the prerecorded tape, and press STOP.
2. Press DISPLAY twice to display only the time counter on the TV screen.
3. Locate the point on the tape that you want to return to quickly.
4. Press CLEAR to reset the time counter to 0:00:00.
5. You can continue to play the tape or perform other functions. When you are finished, press STOP.
6. Press SEARCH three times to display the ZERO SEARCH menu. The current tape counter is disPlayed.
ZERO SEARCH
Current tape counter 4s
2:17:25
Press REW to go to 0:00
Press SEARCH tO extt
ZERO SEARCH
Current tape counter 4a
-2:17:25
Press FWD to go to 0:00
Press SEARCH tO extt
7. Press REW on the remote or turn the shuttle ring counterclockwise toward
REW on the VCR to return to 0:00:00.
The time counter is displayed in the upper right comer of the TV screen
during search.
If the time counter has a minus (-) in front of it, press FF on the remote or
turn the shuttle ring clockwise toward FWD to return to a reading of 0:00:00.
Blank Search
The VCR searches forward for blank portions of the tape that are more than six
seconds in length.
1. Insert the tape and press STOP.
2. Press SEARCH on the remote four times to display the BLANK SEARCH
menu on the TV screen.
BLANK SEARCH
Search for blank area
Press FWD to beg_n
Press SEARCH to exit
3. Press FF or turn the shuttle zing clockwise toward FWD to start the
VCR searching for six seconds of blank tape.
A message appears on the TV screen if a blank area is not found.
4. Press STOP to stop blank searching.
//"2'
31