ProScan PSVR64 Owner's Manual page 38

Recording a Program
Recording a Program
This section explains the available recording options, including the following:
• Basic Recording
• VCR Plus+ Recording
• Timer Recording
• Express (XPR) Recording
• Broadcast Stereo TV or SAP (Second Audio Program) Recording
• Audio Only Recording
• Using Two VCRs for Copying and Editing Tapes
Basic Recording
To Make a Recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or TV's video input channel.
1. Insert a tape with safety tab in place.
2. Press VCR1 (VCR2 • LD) to set remote to control VCR.
3. If using one of the basic hookups, make sure the VC R indicator appears in the VCR's
display panel. If not, press TV *VCR to turn it on.
4. Select recording speed by using SPEED on remote.
The tape speed indicator appears in the VCR's display panel and on the TV screen.
5. Select the channel to be recorded.
The channel number appears in the VCR's display panel and on the TV screen.
6. Press RECORD on the VCR or REC on the remote to begin recording. RE C appears in
the VCR's display panel while the VCR is recording.
Watch a "IV Channel While VCR is Recording a Different Channel
1. Follow steps I through 6 above.
2. If using one of the basic hookups, press TVoVCR to switch to the TV channel.
The VC R indicator will turn off in the display panel.
3. Press TV to set the remote to control TV functions for a compatible TV.
4. Select the channel you want to watch with the TV's channel buttons.
5. Press STOP when recording is finished.
34