ProScan PSVR64 Owner's Manual page 26

Usin9 the Remote Control
Controlling an RCA Auxiliary Component
The remote that came packed with your VCR is also capable of controlling one compatible RCA audio component, such as
an AM/FM radio, CD player, tape player, or phonograph. The remote mustbe programmed for the specific component it
is to control. To program the remote, use the code that corresponds to your component.
Program the Remote for an Auxiliary Component
1. Turn on the component.
2. Point the VCR remote at the component.
3. Hold the AUX button and press two number buttons to enter the code for
your component.
4. Release the buttons.
5. Press POWER on the remote. If the component turns off, setup is complete.
Type of Auxiliary Equipment and code*
AM/FM CD TAPE PHONO
RCA 03 07 06 05
* The remote may not be able to control every RCA model of the
auxiliary equipment listed.
Operate the Auxiliary Component
After you have setup your remote to control your component, test the buttons to see
which ones operate the component.
1. Point the remote at the component and press AUX.
2. If the component does not turn on in step 1, press AUX and then POWER.
3. Test the buttons on the remote to see which ones operate your component.
22