ProScan PSVR64 Owner's Manual page 19

Startup
Use TVaVCR Button
Skip this step if you used one of the advanced hookups.
When using one of the basic hookups, the TV aVCR button lets you switch between the
picture coming from the VCR or the picture from the TV channel. This button lets you
record a program on the VCR while watching another channel on the TV. (Details are
on page 34.)
1. Press VCR1 to set the remote to control the VCR.
2. Make sure the VC R indicator appears in the display panel.
If it does not appear, press TV.VCR.
3. Press CHANNEL up or down on the VCR or CHAN on VCR's remote to change
channels on the VCR.
,
The channel number changes in the display panel.
Press TV.VCR to see the TV channels.
The VCR indicator does not light in the display panel. Change channels using the
TV's remote.
5. Return the TV to the VCR viewing channel -- CH3 or CH4.
6. Press VCR1, then TV • VCR to switch back to the picture from the VCR.
Set Auto TV/VCR Feature
If you used one of the basic hookups and did not connect the audio/video jacks of the
VCR to the TV, leave the Auto TV/VCR feature set to ON.
If you have connected your VCR using the audio/video input of your TV, you can
prevent the VCR indicator from turning on automatically and interrupting the cable or
antenna signal to your TV.
1. Press MENU.PROG on remote to see VCR MAIN MENU on the TV screen.
.
3.
Press 6 to display PREFERENCES.
Press 3 to select Auto TV/VCR: ON or OFF,
Select ON if you used one of the basic hookups and watch your VCR on channel 3
or 4 of your TV. The VCR will automatically switch the TVaVCR setting to VCR
every time the VCR is turned on, a tape with the safety tab removed is inserted, or
you press PLAY.
Select OFF if you used one of the advanced hookups and watch your VCR on the
video input channel of your TV. The V CR indicator will not turn on automatically
and the signal from your antenna or cable to your TV will not be interrupted.
Pressing TVaVCR on the remote will still turn the VCR indicator on or off and
switch the antenna signal.
VCR MAIN MENU
1 VCR PLus+
2 Timer Recordings
3 Time
4 Channels
PREFERENCES
Remote Control: VCR1
4 Panel Display: AUTO
5 CF Marking: ON
6 CF PLayback: AUTO
7 CF Display: BLUE
8 Set Auto Repeat
0 Exit
15