ProScan PSVR64 Owner's Manual page 18

Setting Up the VCR
SetupVCR Plus+ Channels
The VCR must be setup with the VCR Plus+ channels before you can record using VCR
Plus+. This can be done now or at a later time. Details are on page 36.
Program VCR for VCR1 or VCR2oLD Button
You can program this VCR to respond to the VCR1 or VCR2 eLD button on the remote.
Details are on page 19.
Remember you must press VCRi or VCR2eLD on the remote -- whichever you selected
in the menu m before the remote will operate this VCR.
Add or Remove Channels from the VCR's Memory
You may want to add or remove channels if some of the channels are not active, have
weak signals, or you do not want to watch them.
We recommend channels be placed in memory using the Auto Channel Search feature
described earlier before adding or removing channels. Channels 2-13, L1, and L2 are
preset at the factory.
1. Press VCR1 on the remote.
2. Press MENUopROG on the remote to see the VCR MAIN MENU on the T V
screen.
3. Press 4 to display the CHANNELS menu.
4. Press 2 to display the ADD/REMOVE CHANNELS menu.
5. Follow the directions on the screen.
6. Add or remove more channels by entering channel numbers or using CHAN
up or down.
VCR MAIN MENU
I VCR PLus+
2 Timer Recordings
3 Time
CHANNELS
1.A._uLtIQ ChenneL Search
Z
t ignal Type: CABLE
Cebte/DSS Setup
5 VCR PLus+ Channel List
0 Extt
ADD/REMOVE CHANNELS
CH 03
is presently ADDED
Press CLEAR to remove
Press MENU to exit
14