ProScan PSVR64 Owner's Manual page 40

Recording a Program
Recording While You're Away (VCR Plus+* Recording)
VCR Plus+ Setup for Antenna or Unscrambled Cable Systems (Not Requiring a
Cable Box or Cable Box VCR Can Control)
A VCR Plus+ channel number is assigned for each broadcast or cable channel. These numbers are listed
in most publications that list PlusCode* numbers.
1. Prepare the worksheet located on the back cover flap for the VCR Plus+ channels that are
different than the channels you receive them on. Refer to the chart on the back cover flap
for standardized VCR Plus+ channel numbers.
• _,, _-v ,, .... _ 444., ............. ___J
The backcoverflap contains a
blankworksheetand a List of the
Standardized VCRPlus+Channel
Numbersfor youto use.
2,
o
4.
5.
.
Press MENU, PROG on the remote to display the VCR
MAIN MENU on the TV screen.
Press 4 to display CHANNELS menu.
Press 5 to display VCR Plus+ Channel List menu.
Using your worksheet, press two numbers to enter each
channel number you receive on a different channel than the
assigned VCR Plus+ channel number.
Press CHAN up or down to move the numbers up or down
on the menu.
Press CLEAR on the remote to erase a number.
Press MENU, PROG when you are finished.
Auto channel search must be performed before setting the
VCR Plus+ channel list.
VCR RAIN RENU
1 VCR PLus+
2 Ttmer Recordings
3 T4me
CHANNELS
1 Auto Channel Search
2 Add/Remove ChanneLs
Signal Type: ANTENNA
Csbte/DSS Setup
• 0 Exit
VCR+
ChanneL My ChanneL
5 --
4
.77
3 -> -> -> /T_
2 --
I --
use CHAN up/dn to select
Press 0-9 to change
Press MENU to exit
*VCRPlus+ and PlusCode are trademarks of Gemstar Development Corporation.
36