File "Coverpge" - Specifications; File "Elctadj" - How To Initialize The E 2 Prom; When Replacing Ic5A0; Electrical Adjustments - Mitsubishi HS-U748 Service Manual

Hide thumbs Also See for HS-U748:
Table of Contents

Advertisement

MECHANICAL ADJUSTMENT AND REPLACEMENT

1. DECK Cleaning

The following Parts require cleaning whenever serviced in
order to maintain satisfactory performance.

1-1. VIDEO HEAD

1. Clean the VIDEO HEAD according to the following
method. Dust and other foreign objects on the VIDEO
HEAD disturb the normal PLAYBACK picture. To
clean the VIDEO HEAD, hold a VIDEO HEAD
cleaning cloth dampened with alcohol against the
DRUM and slowly turn the DRUM counter-clockwise.
Note : Do not directly touch the HEADS installed to the
UPPER DRUM ASSY. The HEADS are very hard
but brittle to shock (especially to shock in the
vertical direction) and easily breakable.
Never apply force to it in the vertical direction.
2. Allow the residual alcohol to dry thoroughly before
running a tape. The residual alcohol on the HEADs
may damage the tape if not dried completely.
UPPER DRUM ASSY cleaning
e
w
q
Lightly apply the cloth
on the UPPER DRUM
ASSY. Do not move the
cloth.
Video Head
Cleaning
Cloth
Fig. 1-1
!3
o
!0

1-2. Tape Running System

Clean the following Parts of the Tape Running System.
1. TENSION PIN
2. F/E HEAD
3. SLANT POLE (SP)
4. SLANT POLE (TU)
5. A/C HEAD
6. GUIDE POLE (TU)
7. PINCH ROLLER
8. GUIDE PIN (TU)
9. GUIDE ROLLER (SP)
10. UPPER / LOWER DRUM ASSY
11. GUIDE ROLLER (TU)
12. CAPSTAN SHAFT
13. IMPEDANCE UNIT (SP)
1. Clean the Tape Running System, using a piece of
gauze dampened with alcohol, except for the GUIDE
ROLLER (SP), GUIDE ROLLER (TU), and PINCH
ROLLER which require to be cleaned with a piece of
dry gauze.
2. Allow the residual alcohol to dry thoroughly before
running the tape. The residual alcohol on the
SYSTEM may damage the tape if not dried
completely.

1-3. REEL DISK Drive System

1. Clean the BRAKE side and REEL BELT of the REEL
DISK Drive System.
2. Clean the REEL DISK Drive System, using a piece of
gauze dampened with alcohol, except for the REEL
BELT which requires cleaning with a piece of dry
gauze.
3. Allow the residual alcohol to dry thoroughly before
operation.
r
!1
Fig. 1-2
- 1 -
t
y
u
!2
i

Advertisement

Table of Contents
loading

Table of Contents