Table of Contents
Advertisement
Chapter 4: UsingtheAdvanced Features
Makinga Copyof a Tape
There are two basic ways to make a copy of a tape. One way is to
use the HS-U760
to play a tape and use another
VCR to record.
The other way is to use another
VCR to play a tape and the
HS-U760
to record.
Whichever
method
you choose, you will need one RCA audio cable
and one RCA video cable (or one S-Video cable) to connect the two
VCRs. If you do not have these cables, they are available
at your
local electronics
retailer.
In this section you'll learn:
• Using your HS-U760
to record from another
VCR,
• Using your HS-U760
to play back to another
VCR, and
• Using
edit control.
Using your HS-U760to recordfrom another VCR
[RECORDING]
®®
[ PLAYBACK
I
•
'--
tttt
-'--
SIVlDEOIN--
1_
_---EDIT
EDIT--__S-VIDEOOUT
.oo,o,.._
oo.< j uo,oo .t.
_
i
"'q
need
to "]
You only need to use this cable when connecting
The
plugs
on the cable contain
pins that car-
be
|
to a Mitsubishi
VCR with an EDIT terminal.
1
_)_
be
aligned
properly
before
the
plugs
J
%
pushed
into the terminals.
O
Connect
one RCA audio cable to the AUDIO
OUTPUT
terminal
on the other VCR.
Connect
the other end of this cable to the
AUDIO INPUT
terminal
on the HS-U760
,
labeled
L/MONO. If the other VCR is mono,
this is the only audio connection
necessary.
(labeled VIDEO IN). If' you are dubbing
from
an S-V_HS VCR, connect an S-Video cable to
the S-VIDEO OUTPUT
terminal
on the
playback
VCR. Connect
the other end of this
cable to the S-VIDEO
INPUT
terminal
on the
HS-U760
(labeled
S-VIDEO
IN).
O
O
If the other VCR has stereo
outputs,
connect
another
RCA audio cable to the AUDIO
OUTPUT
terminal
of the playback
VCR.
Connect
the other end of this cable to the
AUDIO
INPUT
terminal
on the HS-U760
(labeled
R).
If you are recording
from a standard
VHS
VCR, connect
a video cable to the VIDEO
OUTPUT
terminal
on the playback
VCR.
Connect
the other end of this cable to the
VIDEO INPUT
terminal
on the HS-U760
If you want to record from a standard
video
source connected
to the HS-U760's
rear
panel, :you must
disconnect
any S-Video
cables (such as those from a satellite
receiver.)
O
If you are using another
Mitsubishi
VCR
with an EDIT terminal,
connect
a cable
between
the two VCR's EDIT terminals.
If the other VCR is a Hi-Fi deck, set, the
audio monitor
to "STEREO."
66
Advertisement
Table of Contents
