Maytag PSD243LGRW-PPSD243LGW0 Owner's Manual page 80

IT EDOOR B U( S
Door buckets adjust to meet individual
storage needs.
To remove buckets:
Lift the door bucket up until it clears
the retainers on the door liner, then
pull the door bucket straight out.
To reinstall buckets:
Slide bucket in above desired door
liner retainer and push down until
bucket stops.
Select models feature sealed shelves
with a pullout design to reach items in the
back. For ease of cleaning, glass shelf
may be removed by pulling to full exten-
sion and lifting out of frame.
To remove shelf and frame:
See instructions for Sealed Shelves.
(SELECT MODELS)
The Dairy Center provides convenient
storage for items such as butter, yogurt,
cheese, etc.
This compartment is an adjustable fea-
ture located in the door. It can be moved
to several different locations to accom-
modate storage needs.
To remove bin:
Slide dairy center up and pull out.
To reinstall bin:
Slide assembly in above desired door
liner retainer and push down until it
stops.
To remove dairy door:
Press in sides of dairy door and pull
out.
To reinstall dairy door:
Slide sides of dairy door inside dairy
center until hinge points snap into
place.
SEALED SHELVES
(SELECT MODELS)
Sealed Shelves hold simple spills for
easier cleaning.
To remove shelves:
Lift up and out.
To reinstall shelves:
Reverse above procedure.
CRISPER SHELF
To remove crisper shelf:
Lift off wall supports and remove.
To reinstall crisper shelf:
Lower shelf onto wall supports and
push in until shelf is flush with rear
wall.
TILT-OUT DOOR BUCKETS
(SELECT MODELS)
The Tilt-Out Bucket assembly consists
of a bucket and frame, providing
adjustable, convenient storage for food
items in door. The bucket assembly tilts
forward for easy access of items, and lifts
out for ease in cleaning and adjusting.
To remove and install bucket:
To remove buck-
et, tip bucket for-
ward and pull
straight out to
remove.
To
To install bucket, slide bucket into
bucket frame and push bucket
upright.
adjust bucket frame:
Remove bucket per Y/f '!! IIJl
above instructions.
Lift frame off door
support and place in
desired door location.
7