Lag Screw Installation; Canopy Hardware; Canopy Installation - Casablanca Stealth Instructions Manual

Step 3. With the large washer attached, pass the lag
screw through the center hole of the crosbar mounting
bracket and screw into guide hole. Tighten until outlet
box is firmly mounted to beam. This box must be firmly
secured to the ceiling. We recommend that the ceiling
fixture outlet box be of sufficient capacity enabling it
to support the weight of fan and light fixture under any
conditions.
CANOPY
HATCH
Step 4. Attach the canopy to the crossbar mounting bracket with three
of the 8-32 x 2 " long canopy screws and lock washers provided
1
/
2
with your Casablanca fan. Hand tighten until snug against the ceiling.
Note: On sloped ceilings, align the
canopy opening toward the top or
peak of the room.

LAG SCREw INSTALLATION

CANOPY HARDwARE

CANOPY

CANOPY INSTALLATION

S
tealth
LAG
SCREw
LARGE
wASHER
CANOPY SCREw
CANOPY LOCk wASHER
(4)
FEED OUTLET
BOX wIRES
THROUGH CAN-
OPY OPENING
CANOPY
SCREw
®
(4)
CANOPY
LOCk
wASHER
5