Trigger Controls; Menu And Control Buttons - Tektronix TDS2000C series User Manual

Trigger Controls

Menu and Control Buttons

TDS2000C and TDS1000C-EDU Series Oscilloscope User Manual
2-channel model
Level. When you use an Edge or Pulse trigger, the Level knob sets the amplitude
level that the signal must cross to acquire a waveform.
Trig Menu. Displays the Trigger Menu.
Set To 50%. The trigger level is set to the vertical midpoint between the peaks of
the trigger signal.
Force Trig. Completes an acquisition regardless of an adequate trigger signal.
This button has no effect if the acquisition is already stopped.
Trig View. Displays the trigger waveform in place of the channel waveform while
you hold down the Trig View button. Use this to see how the trigger settings
affect the trigger signal, such as trigger coupling.
Multipurpose knob
4-channel model
Operating Basics
15