Table of Contents
Advertisement
/k
WARNING:
To maintain
proper
tool grounding,
whenever
the outlet you
are planning
to use for this power tool
is of the two prong type do not remove
or alter the grounding
prong
in any man-
ner.
An adapter
is available
for connecting
plug to
2-prong
receptacles.
The green grounding
lead
extending
from the adapter
must be connected
to a permanent
ground
such as to a properly
grounded
outlet box. (Figure 84)
Grounding
Lug
/
_
Make Sure This ls
3 Pron _ Plu n _)
_
I _-- H
Connected
To A
-
_
_
_i _- ,
•
--_
!(_ _) [1
Known Ground
,_"_
_
Receptacle
Adapter
Extension
Cord
The use of any extension
cord wilI _at_N
some loss of power.
Use the following._a.b.Te
to determine
the minimum
wire size
(A.W.G.)
extension
cord. Use only 3- wire ex-
tension
cords which have 3-prong
grounding
type plugs and 3-pole receptacles
which ac-
cept the tool's plug.
Length of
Conductor
Wire sizes Required
(American
Wire Gage
No.)
120V Lines
0 - 25 feet
No. 16
26 - 50 feet
No. 14
51 - !00 feet
No. 12
For circuits
that are farther
away from electri-
cal circuit box, the wire size must be in-
creased
proportionately
in order
to deliver
ample voltage
to the saw motor.
Fig. 84 - Adapter for 2-Prong Receptacles
_i,
WARNING:
The adapter
illustrated
is for use only if you already
have a
properly
grounded
2-prong
receptacle.
35
Hide quick links:
Advertisement
Table of Contents
