Crosscutting; Types Of Crosscutting; Straight Crosscut; Miter Crosscut - Craftsman 113.197110 Operator's Manual

Crosscutting
Crosscutting is used to cut a workpiece to
length. The workpiece is held against the
fence. The saw blade is pulled through the
workpiece. Cuts are usually made across the
grain of the workpiece.
Types of Crosscuts
The basic types of crosscuts are shown below.
Notice the hand and body position in each.
Fig. 85 - Straight Crosscut
4 ¸
Fig. 87 - Bevel Crosscut
Fig. 88- Compound Crosscut
Miter
Straight
Fig 89 _Basic Crosscuts
Bevel
Compound
Fig. 86- Mter Crosscut
36