To maintain proper
tool grounding, whenever the outlet you
are planning to use for this power tool
is of the two prong type do not remove
or alter the grounding prong in any man-
An adapter is available for connecting plug to
The green grounding
lead extending from the adapter must be con-
nected to a permanent
ground such as to a
properly grounded outlet box. (Figure 135)
3-Prong Plug o,"
Sure This Is
The use of any extension cord will cause
some loss of power. Use the following table
the minimum wire size
(A.W.G.) extension cord. Use only 3- wire ex-
tension cords which have 3-prong grounding
type plugs and 3-pole receptacles
cept the tool's plug.
Wire sizes Required
Wire Gage No.)
0 - 25 feet
26 - 50 feet
51 - 100 feet
For circuits that are farther away from electri-
cal circuit box, the wire size must be in-
in order to deliver
ample voltage to the saw motor.
Fig. 135 - Adapter for 2-Prong Receptacles
The adapter illustrated
is for use only if you already have a
properly grounded 2-prong receptacle.