I Ak WARNING:
To avoid accidents, ALWAYS disconnect the tool
from the power source BEFORE cleaning or performing any maintenance.
Certain cleaning agents and solvents cause damage
to the plasUc parts. These include gasoline, carbon tetrachloride.
chlorinated cleaning solvents, ammonia and household detergents
that contain ammonia.
1. Use a clean cloth to remove dirt, carbon dust, etc.
2. Electric tools are subject to accelerated
wear and possible premature failure
when they are used to work on fiber glass boats, sports cars, etc. The fiber
glass chips and grindings are highly abrasive to electrical tool parts, such as
bearings, brushes, commutators,
it is not recommended
that this tool be used for extended work on fiber glass. During any use on
fiber glass, it is extremely important that the tool is cleaned frequently
ALWAYS wear safety goggles when cleaning tools
To assure product SAFETY and RELIABILITY, repairs, maintenance
adjustment MUST be performed by a Sears Service Center.
The following recommended
are currently available at
your local Sears Store.
Sears has a large selection of reciprocating
saw blades in a variety of lengths
and teeth per inch that are ideal for a wide variety of cutting needs, Choose
blades for cutting wood only, blades for metal cutting only and general-purpose
blades that cut wood or metal.
Sears offers a large selection of extension cords that help extend your
I Z_ WARNING:
The use of attachments
that are not
might be dangerous.