Nortel CALLPILOT Installation And Configuration Manual page 71

May 2003
To connect the 1001rp DC server to power
.
1 Connect the DC power cable to the server, as shown below:
Part 2: 1001rp Server Hardware Installation
Installing the server and connecting the peripheral devices
DANGER
Risk of electrical shock
„
Only qualified personnel can alter electrical connections.
„
Ensure the PDU is turned off until you are instructed to
turn it on.
Negative
cable (black)
Ground wire
(green)
Receptacle for
positive and
negative plug
Positive
cable (red)
Posts for
ground wire
G101737
71