Nortel CALLPILOT Installation And Configuration Manual page 63

May 2003
However, if you choose to establish a direct point-to-point ELAN
connection, no other device can connect to the ELAN.
5 At the switch, connect the ELAN network cable to an MAU (Ethernet)
transceiver. Then complete the connection from the transceiver to the
switch.
.
What's next?
IF the server will
be connected to a CLAN
not be connected to a CLAN
Part 2: 1001rp Server Hardware Installation
Installing the server and connecting the peripheral devices
DANGER
Risk of fire hazard
MAU model NTRH9069 is not suitable for installation in
ducts, plenums, or other spaces used for environmental air. Do
not install it above a false ceiling or below a raised floor,
unless it can be confirmed that these spaces are not used to
convey environmental air.
THEN
continue with page 64.
continue with installing the software
feature key adapter (dongle). See page
66.
63