Nortel CALLPILOT Installation And Configuration Manual page 56

Installing the server and connecting the peripheral devices
Modem DIP switches
Set the modem DIP switches before you connect the modem to the CallPilot
server.
Note: This section applies only to the US Robotics 33.6 or 56 Kbps external
Sportster modem. If your modem is different, refer to the documentation for
your modem.
The following diagram shows the key components of the external modem,
including the location and required settings of the DIP switches:
RJ-11
connection
56
DIP
switches
1 2 3 4 5 6 7 8
Switch positions:
OFF
ON
1 2 3 4 5 6 7 8
Serial cable
(RS-232)
connection
Standard 1.0
Power
connection
G101445
CallPilot