To Remove The Front Bezel - Nortel CALLPILOT Installation And Configuration Manual

Preparing for installation

To remove the front bezel

.
1 Unlock and open the double doors of the front bezel. See "A" in the
diagram below.
2 Firmly grasp the front bezel by the hand-holds on either side of the
chassis, and pull the front bezel from the chassis.
32
CAUTION
Risk of equipment damage
Do not attempt to move or lift the server before removing the
front bezel; the server can disengage from the bezel and fall.
Standard 1.0
A
B
G101733
CallPilot