Nortel CALLPILOT Installation And Configuration Manual page 23

May 2003
Network requirements
Appropriate networking equipment must be available for both the CLAN
and ELAN.
The CLAN and ELAN must be properly configured for correct CallPilot
operation. To ensure correct configuration, Nortel Networks recommends
that you consult a network specialist.
ATTENTION
Remote access connectivity
The RS-232 COM 1 connector on the rear of the 1001rp server provides the
connection to an external modem. The modem allows administrators and
technical support personnel to administer the 1001rp server from a remote
location.
pcAnywhere is used to establish the remote access connection to the server.
Part 2: 1001rp Server Hardware Installation
For important considerations about using the ELAN in
your network, see "About the ELAN" in Part 1 of the
CallPilot Installation and Configuration binder.
1001rp server description
23