Nortel CALLPILOT Installation And Configuration Manual page 27

May 2003
Step Description
6 For a DC-powered server, set up the DC power source (see
page 43).
7 Place the 1001rp server in the chosen location (see page 54).
8 Replace the front bezel (see page 34).
9 Set the DIP switches on the modem (see page 57).
10 Connect the 1001rp server and devices as follows:
„
Connect the monitor, keyboard, and mouse (see page 59).
„
Connect the modem (see page 60).
„
Connect the 1001rp server to the ELAN hub (Meridian 1 or
Succession CSE 1000 only) (see page 62).
„
Connect the 1001rp server to the CLAN hub (optional) (see
page 64).
„
Install the software feature key adapter (see page 66).
„
Connect the power cords for all devices, and then power
them up.
11 Start the 1001rp server (see page 68).
Part 2: 1001rp Server Hardware Installation
Preparing for installation
Check
27