Installing Remote Access Software On A Management Station - Dell PS-M4110 User Manual

To daisy-chain up to four chassis:
1. Connect the GB port of the active CMC in the first chassis to the management network.
2. Connect the GB port of the active CMC in the second chassis to the STK port of the active CMC in the first chassis.
3. If you have a third chassis, connect the GB port of its active CMC to the STK port of the active CMC in the second
chassis.
4. If you have a fourth chassis, connect the GB port of its active CMC to the STK port of the third chassis.
5. If you have redundant CMCs in the chassis, connect them using the same pattern.
CAUTION: The STK port on any CMC must never be connected to the management network. It can only be
connected to the GB port on another chassis. Connecting a STK port to the management network can disrupt
the network and cause a loss of data. Cabling GB and STK to the same network (broadcast domain) can
cause a broadcast storm.
NOTE: Do not connect an active CMC to a standby CMC.
NOTE: Resetting a CMC whose STK port is chained to another CMC can disrupt the network for CMCs that
appear later in the chain. The child CMCs may log messages indicating that the network link has been lost
and they may fail over to their redundant CMCs.
6. To get started with CMC, see

Installing Remote Access Software on a Management Station

You can access CMC from a management station using remote access software, such as the Telnet, Secure Shell (SSH),
or serial console utilities provided on your operating system or using the Web interface.
To use remote RACADM from your management station, install remote RACADM using the
Tools and Documentation DVD that is available with your system. This DVD includes the following Dell OpenManage
components:
• DVD root — Contains the Dell Systems Build and Update Utility.
• SYSMGMT — Contains the systems management software products including Dell OpenManage Server
Administrator.
• Docs — Contains documentation for systems, systems management software products, peripherals, and RAID
controllers.
• SERVICE — Contains the tools required to configure your system, and delivers the latest diagnostics and Dell-
optimized drivers for your system.
For information about installing Dell OpenManage software components, see the
Security User's Guide available on the DVD or at dell.com/support/manuals. You can also download the latest version of
the Dell DRAC Tools from dell.com/support.
24
Installing Remote Access Software on a Management Station.
Dell Systems Management
Dell OpenManage Installation and