Dell PS-M4110 User Manual page 223

Table 47. PSU Status Screens
Severity Message
Critical Power supply <number> failed.
Critical The power input for power supply <number> is
lost.
Warning Power supply <number> is operating at 110 volts,
and could cause a circuit breaker fault.
Table 48. Server Status Screen
Severity Message
Warning The system board ambient temperature is less
than the lower warning threshold.
Critical The system board ambient temperature is less
than the lower critical threshold.
Warning The system board ambient temperature is
greater than the upper warning threshold.
Critical The system board ambient temperature is
greater than the upper critical threshold.
Critical The system board Current Latch current is
outside of the allowable range
Critical The system board battery failed.
Warning The storage battery is low.
Critical The storage battery failed.
Critical The CPU <number> <voltage sensor name >
voltage is outside of the allowable range.
Critical The system board<voltage sensor name >
voltage is outside of the allowable range.
Critical The mezzanine card <number> <voltage
sensor name > voltage is outside of the
allowable range.
Critical The storage <voltage sensor name > voltage is
outside of the allowable range.
Critical CPU <number> has an internal error (IERR).
Critical CPU <number> has a thermal trip (over-
temperature) event.
Critica CPU <number> configuration is unsupported.
Critical CPU <number> is absent.
Cause
The PSU has failed.
Loss of AC power or AC cord unplugged.
Power supply is plug into a 110 volt source.
Cause
Server temperature is getting cool.
Server temperature is getting cold.
Server temperature is getting warm.
Server temperature is getting too hot.
Current crossed a failing threshold.
CMOS battery is not present or has no voltage.
ROMB battery is low.
CMOS battery is not present or has no voltage.
CPU failure.
CPU overheated.
Incorrect processor type or in wrong location.
Required CPU is missing or not present.
223