Dell PS-M4110 User Manual page 224

Severity Message
Critical Mezz B<slot number> Status: Add-in Card
sensor for Mezz B<slot number>, install error
was asserted.
Critical Mezz C<slot number> Status: Add-in Card
sensor for Mezz C<slot number>, install error
was asserted.
Critical Drive <number> is removed.
Critical Fault detected on Drive <number>.
Critical The system board fail-safe voltage is outside
of the allowable range.
Critical The watchdog timer expired.
Critical The watchdog timer reset the system.
Critical The watchdog timer powered off the system.
Critical The watchdog timer power cycled the system. The iDRAC watchdog detected that the system has
Critical Log is full.
Warning Persistent correctable memory errors
detected on a memory device at location
<location>.
Warning Persistent correctable memory error rate has
increased for a memory device at location
<location>.
Critical Multi-bit memory errors detected on a memory
device at location <location>.
Critical An I/O channel check NMI was detected on a
component at bus <number> device <number>
function <number>.
Critical An I/O channel check NMI wa detected on a
component at slot <number>.
Critical A PCI parity error was detected on a
component at bus <number> device <number>
function <number>.
224
Cause
Incorrect Mezzanine card installed for IO fabric.
Incorrect Mezzanine card installed for IO fabric.
Storage Drive was removed.
Storage Drive failed.
This event is generated when the system board
voltages are not at normal levels.
The iDRAC watchdog timer expires and no action is
set.
The iDRAC watchdog detected that the system has
crashed (timer expired because no response was
received from Host) and the action is set to reboot.
The iDRAC watchdog detected that the system has
crashed (timer expired because no response was
received from Host) and the action is set to power
off.
crashed (timer expired because no response was
received from Host) and the action is set to power
cycle.
The SEL device detects that only one entry can be
added to the SEL before it is full.
Correctable ECC errors reach a critical rate.
An uncorrectable ECC error was detected.
A critical interrupt is generated in the I/O Channel.
A critical interrupt is generated in the I/O Channel.
Parity error was detected on the PCI bus.