Selected Component Information; Viewing Server Model Name And Service Tag; Viewing Chassis Summary; Viewing Chassis Controller Information And Status - Dell PS-M4110 User Manual

Icon

Selected Component Information

Information for the selected component is displayed in three independent sections:
• Health and Performance and Properties — Displays the active critical and non-critical events as shown by the
hardware logs and the performance data that vary with time.
• Properties — Displays the component properties that do not vary with time or change only infrequently.
• Quick Links — Provides links to navigate to the most frequently accessed pages, and also the most frequently
performed actions. Only links applicable to the selected component are displayed in this section.

Viewing Server Model Name and Service Tag

You can view the model name and service tag of each server instantly using the following steps:
1. Expanding Servers in the System tree. All the servers (1-16) appear in the expanded Servers list. A slot without a
server has its name grayed out.
2. Using the cursor to hover over the slot name or slot number of a server; a tool tip is displayed with the server's
model name and service tag (if available).

Viewing Chassis Summary

You can view the summary of the installed components in the chassis.
To view the chassis summary information, in the CMC Web interface, go to Chassis Overview → Properties →
Summary .
The Chassis Summary page is displayed. For more information, see the

Viewing Chassis Controller Information and Status

To view the chassis controller information and status, in the CMC Web interface, go to Chassis Overview →
Chassis Controller → Properties → Status.
The Chassis Controller Status page is displayed. For more information, see the

Viewing Information and Health Status of All Servers

To view the health status of all the servers, do any of the following:
1. Go to Chassis Overview → Properties → Health .
The Chassis Health page displays a graphical overview of all the servers installed in the chassis. Server health
status is indicated by the overlay of the server subgraphic. For more information, see the
2. Go to Chassis Overview → Server Overview → Properties → Status.
Description
No server is present.
CMC Online Help .
CMC Online Help .
CMC Online Help .
59