Updating Iom Software Using Cmc Web Interface - Dell PS-M4110 User Manual

1. In the system tree, go to I/O Module Overview and click Setup or expand I/O Module Overview in the system tree,
select the IOM, and click Setup.
The Deploy I/O Modules page displays the IOM(s) that are powered on.
2. For the required IOM(s), click Reset.
A warning message is displayed.
3. Click OK to continue.
Related Links
Fabric Management Overview
Invalid Configurations
Fresh Power-up Scenario
Monitoring IOM Health
Configuring Network Settings for IOM(s)
Managing VLAN for IOM
Managing Power Control Operation for IOMs
Enabling or Disabling LED Blinking for IOMs

Updating IOM Software Using CMC Web Interface

You can update the IOM software by selecting the required software image from a specified location. You can also
rollback to an earlier software version.
NOTE: This feature is supported on PowerEdge M I/O Aggregator IOM only. Other IOMs including MXL 10/40GbE
are not supported.
To update the IOM Infrastructure device software, in the CMC Web interface:
1. Go to Chassis Overview → I/O Module Overview → Update .
The IOM Firmware and Software page is displayed.
Alternatively, go to any of the following:
– Chassis Overview → Update
– Chassis Overview → Chassis Controller → Update
– Chassis Overview → iKVM → Update
The Firmware Update page is displayed, which provides a link to access the IOM Firmware and Software page.
2. In the IOM Firmware and Software page, in the IOM Software section, select the checkbox in the Update column
for the IOM you want to update the software and click Apply Software Update .
Alternatively, to rollback to the earlier versions of the software, select the checkbox in the Rollback column
3. Select the software image for the software update, using the Browse option. The name of Software image gets
displayed in the IOM Software Location field.
The Update Status section provides software update or rollback status information. A status indicator displays on
the page while the image file uploads. File transfer time varies based on connection speed. When the internal
update process begins, the page automatically refreshes and the Firmware update timer is displayed.
NOTE: Do not click the Refresh icon or navigate to another page during the file transfer.
NOTE: The file transfer timer is not displayed when updating IOMINF firmware.
When the update or rollback is complete, there is a brief loss of connectivity to the IOM device since it resets and
the new firmware is displayed on the IOM Firmware and Software page.
163