Viewing Psu Information And Health Status; Viewing Information And Health Status Of Temperature Sensors; Viewing Lcd Information And Health - Dell PS-M4110 User Manual

Move the cursor over an iKVM subgraphic and a corresponding text hint or screen tip is displayed. The text hint
provides additional information for the iKVM. Click the iKVM subgraphic to view the iKVM information on the right.
2. Go to Chassis Overview → iKVM → Properties .
The iKVM Status page displays the status and readings of the iKVM associated with the chassis. For more
information, see the CMC Online Help .

Viewing PSU Information and Health Status

To view the health status of the Power Supply Units (PSUs) associated with the chassis, do any of the following:
1. Go to Chassis Overview → Properties → Health .
The Chassis Health page is displayed. The lower section of chassis graphics provides the rear view of the chassis
and contains the health status of all PSUs. PSU health status is indicated by the overlay of the PSU subgraphic. Use
the cursor to hover over an individual PSU subgraphic and a corresponding text hint or screen tip is displayed. The
text hint provides additional information on that PSU. Click the PSU subgraphic to view the PSU information on the
right.
2. Go to Chassis Overview → Power Supplies.
The Power Supply Status page displays the status and readings of the PSUs associated with the chassis. It
provides the overall power health, system power status, and the power supply redundancy status. For more
CMC Online Help .
information, see the

Viewing Information and Health Status of Temperature Sensors

To view the health status of the temperature sensors:
Go to Chassis Overview → Temperature Sensors.
The Temperature Sensors Status page displays the status and readings of the temperature probes on the entire
chassis (chassis and servers). For more information, see the
NOTE: The temperature probes value cannot be edited. Any change beyond the threshold generates an alert
that causes the fan speed to vary. For example, if the CMC ambient temperature probe exceeds threshold, the
speed of the fans on the chassis increases.

Viewing LCD Information and Health

To view the health status for the LCD:
1. In the CMC Web interface, in the system tree go to Chassis Overview, and then click Properties → Health.
The Chassis Health page is displayed. The top section of Chassis Graphics depicts the front view of the chassis.
LCD health status is indicated by the overlay of the LCD subgraphic.
2. Move the cursor over the LCD subgraphic. The corresponding text hint or screen tip provides additional information
on the LCD.
3. Click the LCD subgraphic to view the LCD information on the right. For more information, see the
62
CMC Online Help .
CMC Online Help .