Enable Prefilled E-Mail Fields; Control Max Length Of Encryption Keys - Lexmark X642E - X642E Administrator's Manual

2 SafeCom Go Lexmark

2.5.11 Enable prefilled e-mail fields

To give the SafeCom solution access control to the MFP's Send to E-mail
5
function.
1. Set access control of the E-mail Function to SafeCom (2.3.2).
2. Check E-mail in Track on the Configuration web page (2.4.2).
The From: field can be pre-filled with User e-mail or Default From: address.
A prefilled e-mail sent from John Smith (e-mail address js@safecom.dk) looks
like this:
From: John Smith <js@safecom.eu>
If the user does not have an e-mail address, the Default from: address is used.
If this is not configured then it will use the Reply Address that is specified as
part of the SMTP Setup on the device.
The To: field can be pre-filled with User e-mail, Blank or Default To: address.
Check Force BCC to user to have the BCC: field pre-filled with the user's e-
mail address.

2.5.12 Control max length of encryption keys

1. Open the Configuration web page (2.4.2).
2. Scroll to the Encryption section at the bottom of the page.
3. Asymmetric key max length can be: Default, 512, 1024 or 2048.
Symmetric key max length can be: Default, 128 or 256.
4. Click Apply.
5. Restart the device.
5
SafeCom cannot handle access control on the C792e, C792de, C792dte, C792dhe,
C925de, C950de MFPs and printer T656dne.
D60711-14 28