Lexmark X642E - X642E Administrator's Manual page 35

3 Using SafeCom Go Lexmark
Login with card:
1. Swipe card on the card reader.
2. Tap an icon or press the Start button to copy. Make sure to use the
device before the 10 second countdown is done.
Note: If you tap an icon before you have used the card, the Use card dialog
appears.
Login with card and PIN code:
1. Swipe card on the card reader.
2. Before 10 seconds have elapsed tap an icon, or press the Start button to
copy.
3. Enter PIN code on the keypad or touchscreen.
4. Tap Next.
Note: If you tap an icon before you have used the card, the Enter PIN code
then use card dialog appears.
Login with user code:
1. Tap an icon, or press the Start button to copy.
2. Enter User code on the keypad or touchscreen.
3. Tap Next.
Login with user code and PIN code:
1. Tap an icon, or press the Start button to copy.
2. Enter the User code on the keypad or touchscreen.
3. Tap Next.
4. Enter PIN code on the keypad or touchscreen.
5. Tap Next.
If User identification (2.5.4) is Card or User code login is as described above.
However, if you tap an icon before you have used the card, you will be
prompted with the Enter user code OR use card dialog. If the device also
requires a PIN code you will be prompted with the Enter user code OR use
card then enter PIN code dialog.
6
On Lexmark X464, the touchscreen does not display a 10-second countdown.
7
On Lexmark X463, X464 and X466, the touchscreen does not display a 10-second
countdown.
D60711-14
7
6
35