3 Using SafeCom Go Lexmark
3.8
Register card with Windows credentials
1.
Use card reader.
2.
Tap Next to register card.
3.
Enter Username on the touchscreen. Tap Next.
4.
Enter Password on the touchscreen. Tap Next.
5.
Enter Domain on the touchscreen. Tap Next.
The solution can be configured to NOT prompt for the domain (2.5.5).
6.
The card is registered and the user is logged in.
3.9
Register card with PUK code
1.
Use card reader. If the card is unknown and there is an available PUK
code in the SafeCom system the user is asked to enter a PUK code.
2.
Enter PUK code on the keypad or touchscreen.
3.
Tap Next.
Steps 4-7 are relevant only if the device requires login by PIN code (Login
without PIN code is not checked).
4.
Enter PIN code on the keypad or touchscreen.
5.
Tap Next.
6.
Enter PIN again on the keypad or touchscreen.
7.
Tap Next.
8.
The card is registered and the user is prompted to login again.
D60711-14
If there is an available PUK code in the system, tap Cancel in the
Please enter PUK dialog. The Login to register card dialog appears.
If there are no available PUK codes the user gets the Login to
register card dialog. To abort the registration of the card tap
Cancel in this dialog.
39