Restore Factory Default Settings - Lexmark X642E - X642E Administrator's Manual

2 SafeCom Go Lexmark

2.5.13 Restore factory default settings

1. Open the Configuration web page (2.4.2).
2. Click Restore factory default.
The factory default values are:
Configuration settings
Group name
SafeCom server TCP port
Server IP
Device name
Device model
Device location
User identification
Default domain
Pre-fill domain
Mask user code
Login without PIN code
Print all at login
Document list, Show newest first
Track, Copy
Track, Folder
Track, Fax
Track, E-mail
Pull Print access control
Drivers
Timeout
Post track
High speed print
E-mail, Default from:
E-mail, Pre-fill from:
E-mail, Default to:
E-mail, Editable
E-mail, Force BCC to user
Asymmetric key max length
Symmetric key max length
Log settings
Log
Password settings
Password
(A restore factory default does NOT
change the password).
D60711-14
Default value
7500
Auto-sense
Blank
Cleared (No)
Checked (Yes)
Cleared (No)
Checked (Yes)
Cleared (No)
Cleared (No)
Cleared (No)
Cleared (No)
Solution 1
60 seconds
Cleared (No)
Checked (Yes)
no_reply@safecom.eu
User E-mail
invalid@safecom.eu
Checked (Yes)
Cleared (No)
Default
Default
Default value
Disabled
Default value
nimda
30