Safecom Go Lexmark; Overview; Install Safecom Go Lexmark - Lexmark X642E - X642E Administrator's Manual

2 SafeCom Go Lexmark

2 SafeCom Go Lexmark
2.1

Overview

Complete SafeCom G3 Server software installation as described in SafeCom
Smart Printing Administrator's Quick Guide D10600.
1. SafeCom Go Lexmark software installation (2.2).
Note: For devices with SafeCom Go Lexmark 012xxx software, proceed to step
4 (skip steps 2 & 3).
2. Add the SafeCom Security Template (2.3).
3. Edit access control (2.3.2).
4. Show/hide icons on the control panel (2.3.3).
5. Install optional card reader (2.3.4).
2.2

Install SafeCom Go Lexmark

1. Make sure the printer is powered on and ready.
2. Start SafeCom Administrator and login to the server.
3. Browse to Add device in the Devices menu, System overview, or in
SafeCom Assistant.
4. Enter the Printer address. Click Next.
Printer address:
5. The device sends its details to the SafeCom Administrator. Click Next.
6. On the Settings tab, select device Capabilities, including support of
Duplex and Color.
7. Click Add to register the device in the SafeCom solution.
7a. Right-click the device and click Update software...
8. Click Send to send the SafeCom Go Lexmark software file (*.fls) to the
device. You may need to download the file first (see 2.5.1).
9. Click Close when download is completed.
10. After 2-5 minutes the printer's control panel will say Ready and after
another 2-3 minutes the printer has loaded the SafeCom Go application.
10a. Open the Configuration web page (2.4.2) and specify the SafeCom server
(2.5.2).
Alternatively install the SafeCom Go Lexmark software via a web browser:
1. Open a web browser and enter the IP address of the printer in the address
field. Use of JavaScript (Active Scripting) must be enabled.
2. Click Settings on the menu.
3. In the Other Settings list click Embedded Solutions.
D60711-14 10