E-Mailing; Using The Automatic Document Feeder And Scanner Glass; Configuring The E-Mail Smtp Settings - Lexmark MX826 User Manual

E-mailing

E-mailing

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)
•
Use the ADF for multiple‑page or two-sided
documents.
•
Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
Configuring the e‑mail SMTP settings
Configure the Simple Mail Transfer Protocol (SMTP) settings to send a scanned document through e-mail. The
settings vary with each e‑mail service provider.
Before you begin, make sure that the printer is connected to a network and that the network is connected to
the Internet.
Using the Settings menu in the printer
1
From the home screen, touch Settings > E‑mail > E‑mail Setup.
2
Configure the settings.
Notes:
•
For more information on the password, see the list of
•
For e‑mail service providers that are not on the list, contact your provider and ask for the settings.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > E‑mail.
Scanner glass
•
Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
e‑mail service providers.
55