2 SafeCom Go Lexmark
2.5.5
Login with Windows without specifying the domain
On MFPs with touchscreen it is possible to login by entering your Windows
username, password (and domain). If all users belong to the same domain you
can configure the device so they don't need to enter their domain at the
device.
1.
Open the Configuration web page (2.4.2).
2.
Specify a Default domain.
3.
Change Pre-fill domain to Hide.
4.
Click Apply.
2.5.6
Login without PIN code
Use of PIN code is possible on printers with keypad or touchscreen. This setting
applies to the printer and overrules the equivalent user property. Requesting
the user to enter a personal 4-digit PIN code for identification at the printer
enhances document security.
1.
Open the Configuration web page (2.4.2).
2.
Clear Login without PIN code if you want to prompt users for PIN code.
3.
Click Apply.
2.5.7
Disable Pull Print
It is not possible to disable or hide the Pull Print icon.
D60711-14
26