Table of Contents
Advertisement
Set up, install, and configure
Configuring daylight saving time
1
From the home screen, touch Settings > Device > Preferences > Date and Time > Configure.
2
In the Time Zone menu, touch (UTC+user) Custom.
3
In the Configure menu, touch UTC Offset.
4
Configure the settings.
Configuring the fax speaker settings
1
From the home screen, touch Settings > Fax > Fax Setup > Speaker Settings.
2
Do the following:
•
Set the Speaker Mode to Always On.
•
Set the Speaker Volume to High.
•
Activate the Ringer Volume.
Configuring the e‑mail SMTP settings
Configure the Simple Mail Transfer Protocol (SMTP) settings to send a scanned document through e-mail. The
settings vary with each e‑mail service provider. For more information, see
Before you begin, make sure that the printer is connected to a network and that the network is connected to
the Internet.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > E‑mail.
3
From the E‑mail Setup section, configure the settings.
Notes:
•
For more information on the password, see the list of
•
For e‑mail service providers that are not on the list, contact your provider and ask for the settings.
4
Click Save.
Using the e‑mail setup wizard in the printer
Note: Before using the wizard, make sure that the printer firmware is updated. For more information, see
"Updating firmware" on page
1
From the home screen, touch E‑mail.
2
Touch Set up now, and then type your e‑mail address.
39.
e‑mail service
e‑mail service
providers.
26
providers.
Advertisement
Table of Contents
